Alloy steel is steel that is alloyed with a variety of elements intotal amounts between 1.0%and 50%by weight to improve itsmechanical properties.Alloy steels are broken down into twogroups:low alloy steels and high alloy steels.The differencebetween the two is disputed.Smith and Hashemi define thedifference at 4.0%,while Degarmo,et al.,define it at 8.0%.[1][2]Most commonly,the phrase "alloy steel"refers to low-alloysteels.
| Material | Monel/Inconel/Hastelloy/Duplex Steel/PH Steel/Nickel Alloy |
| Shape | Round,Forging,Ring,Coil,Flange,Disc,Foil,Spherical,Ribbon,SquarefBar,Pipe, Sheet |
| Grade | Duplex:2205(UNS S31803/S32205),2507(UNS S32750),UNS S32760(Zeron 100),2304,904L |
| Others:253Ma,254SMo,654SMo,F50(UNSS32100)F60,F61 ,F65,1 J22.N4.N6 etc |
|
| Alloy:Alloy 20/28/31 | |
| HastelloyHastelloyB/-2/B-3/C22/C-4/S/C276/C-2000/G-35/G-30/X/N/g | |
| Hastelloy B/UNS N10001.Hastelloy B-2 /UNS N10665 /DIN W.Nr.2.4617, Hastelloy C,Hastelloy C-4/UNS N06455/DIN W.Nr.2.4610.Hastelloy C-22/ UNS N06022 /DIN W.Nr.2.4602, |
|
| Haynes : Haynes 230/556/188 | |
| Inconel 600/601/602CA/617/625/713/718/738/X-750,Carpenter 20 | |
| Inconel 600/601/602CA/617/625/713/718/738/X-750,Carpenter 20Inconel 718/UNS N07718 /DIN W.Nr.2.4668jnconel 601/UNS N06601/DIN W Nr.2.4851,Inconel 625/UNS N06625/DIN W.Nr.2.4856Jnconel 725 /UNS N07725Jnconel X-750 /Inconel 625/UNS N06625 /DIN W.Nr.2.4856Jnconel 725 /UNS N07725Jnconel X-750 /UNS N07750 /DIN W.Nr.2.4669,Inconel 600 /UNS N06600 /DIN W.Nr.2.4816 |
|
| Incoloy Incoloy 800/800H/800HT/825/925/926; | |
| GH:GH2132,GH3030,GH3039,GH3128.GH4180.GH3044 | |
| Monel: Monel 400/K500/R405 | |
| Nitronic:Nitronic 40/50/60; | |
| Nimonic:Nimonic 75/80A/90/A263 | |
| Specification | Wire: 0.01-10mm Strip:0.05*5.0-5.0*250mm Bar(p4-50mm;Length 2000-5000mm Pipe:(p6-273mm;01-30mm;Length 1000-8000mm Sheet:00.8-36mm;Width 650-2000mm;Length 800-4500mm |
| Product Characterisrics |
1.According to the preparation process can be divided into deformation superalloys,casting superalloys and powder metallurgy superalloys 2.According to the strengthening mode,there are solid solution strengthening type,precipitation strengthening type,oxide dispersion strengthening type and fiber strengthening type,etc.. |
|
Standard |
GB,AISI,ASTM,DIN,EN,SUS,UNS etc |
| Inspection | ISO,SGS,BV and so on. |
